|Store Name||Mellow Store|
|Last Update||Sat, 22 Feb 2020 00:02:16 +0000|
|Print temperature range||Up to 450C|
|Heating block material||Copper|
|Ordinary version||Suitable for small flow normal speed printing|
|Magnum version||Similar to the hot end of the volcano for high-speed printing|
You create life possibilities, and 3D Mellow only create high quality 3D printer accessories.Enjoy of 3D printing.
Good news! The NF team officially joined our company, and the high-quality product series is all supervised by NF.
1.Conductive heat sinks are reduced by 85% compared to threaded heat breaks.Low thermal conductivity reduces the need for large heat sinks. 2.Small in size, but with a sturdy construction, only one hand can be used to tighten the nozzle. 3.The hot block nickel plating can reduce the wear of the thread and the oxidation of the hot block. The copper heat block can not soften at 550 C high temperature and has good thermal conductivity. 4.Suitable for almost any FFF/FDM printer,Can use a very simple installation solution. 5.It can save 20% time compared to other hot ends, and the working temperature can reach 450 C, which meets the needs of printing engineering plastics.
Set1 is suitable for use with small flow nozzles such as 0.2MM-0.4MM. Set2 is a Magnum version similar to the volcano hot end, suitable for large flow nozzles such as 0.6MM-0.8MM, Support for faster printing
1*Heat Sink 1*Ordinary Heat break 1*Plated Copper Heat Block 1*Plated Copper V6 Nozzle 1*Groove Mount Adapter 1Set Screws
1*Heat Sink 1*Magnum Heat break 1*Heat Break Insulator 1*Plated Copper Heat Block 1*Plated Copper V6 Nozzle 1*Groove Mount Adapter 1Set Screws