Duet 2 Wifi Control Board 32 Bit Cloned Duetwifi+4.3'' PanelDue Touch Screen Expansion Board CNC To SKR V1.3 3D Printer Parts

  • US $20.60
  • US $23.68
  • 13% off

Store Name BIG TREE TECH CO.,LTD Store
SKU 33023171690
Shipping Free Shipping
Availability In stock
Last Update Fri, 21 Feb 2020 23:52:40 +0000
  • Product Details

    Duet 2 Wifi Control Board 32 Bit Cloned Duetwifi+4.3'' PanelDue Touch Screen Expansion Board CNC To SKR V1.3 3D Printer Parts Product Details:


    Brand Name BIQU
    Item Type Motherboard
    Model Number Cloned DuetWifi v1.04
    Product Name Clone Duet 2 Wifi Control Board
    CPU 32 Bit CPU
    With 5PCS TMC2660 stepper drivers chip
    Compatible With 4.3" 5" 7" PanelDue Touch Screen
    Usage 3D Printer Board
    Quality Guarantee
    Expansion Board Support Can Add Extra 10 Sterpper Motor Driver
    And Support Add Extra 2 Extruder
  • Product Description

    Duet 2 Wifi Control Board 32 Bit Cloned Duetwifi+4.3'' PanelDue Touch Screen Expansion Board CNC To SKR V1.3 3D Printer Parts Product Description:



    Type 1:
    Only Duet 2 Wifi V1.04
    Type 2:
    Only Panel Due
    Type 3: 4.3/5/7 LCD and Pan​el Due
    1PC *4.3/5/7'' Touch Screen(With Cables)
    1PC *Panel Due(With Cable)
    Type 4: 4.3/5/7 inch All Kits
    1PC *Duet 2 Wifi (With USB)
    1PC *4.3/5/7'' Touch Screen(With Cables)
    1PC *Panel Due(With Cable)


    Pruduct Name: Cloned Duet 2 Wifi
    Duet 2 Wifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the Duet 2 Ethernet other than providing a WiFi connectivity rather than ethernet, full feature description is available in our documentation, in summary:
    Powerful 32 Bit Processor
    Dedicated Wifi module
    Super quiet TMC2660 stepper drivers, up to 256 microstepping.
    High speed SD card and support for a second SD external card if required.
    Dual extruders on the main board, up to 5 more extruders on the expansion board.
    High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).
    Connect via PC, tablet or smartphone on the same network to the on board web interface.
    Setup your printer and update the firmware through the web interface.
    All common 3D printer geometries are supported
    Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.
    Support for the PanelDue: a full colour graphic touch screen
    Provided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.
    The PanelDue is a colour touch screen controller for the Duet and other 3dprinting electronics that support it.
    The control board and firmware support 3 screen sizes: 4.3", 5" and 7", at two resolutions: 480×272 (4.3-inch displays) or 800×480 pixels (5- and 7-inch displays). Note that the lower resolution of the 4.3” display means that it cannot display as much information on the screen – for example a maximum of 4 extruders, as shown in the picture.
    Please note that at the moment we are not supplying 7” displays as we were not happy with the quality of our last batch of 7” LCDs and are looking for a new supplier.
    5V power from host 3D printer controller.
    2-wire async serial interface with 3.3V signal level (5V tolerant input).
    Connections to the external SD card socket that is included on most compatible displays is available via a 10-way ribbon cable connector on version 2.0 PanelDue boards.
    4-wire cable to connect the PanelDue to your controller board for the serial and power connections.
    The control board without a screen is also available however a 4.3”, 5” or 7” SSD1963 LCD panel is required and the instructions on David Crocker’s PanelDue blog must be followed.

  • Related Searches

Related Products